The rack must be of the following type:
• A standard 19-in. (48.3-cm) wide, four-post EIA rack, with mounting posts that conform to English
universal hole spacing, per section 1 of ANSI/EIA-310-D-1992.
• The rack post holes can be square 0.38-inch (9.6 mm), round 0.28-inch (7.1 mm), #12-24 UNC, or #10-32
UNC when you use the supplied slide rails.
• The minimum vertical rack space per server must be one RU, equal to 1.75 in. (44.45 mm).
Equipment Requirements
The slide rails supplied by Cisco Systems for this server do not require tools for installation. The inner rails
(mounting brackets) are pre-attached to the sides of the server.
Slide Rail Adjustment Range
The slide rails for this server have an adjustment range of 24 to 36 inches (610 to 914 mm).
Server Specifications
This section lists the technical specifications for the server and includes the following sections:
Physical Specifications
The following table lists the physical specifications of the server.
SpecificationDescription
1.7 in. (4.3 cm)Height
16.9 in. (42.9 cm)Width
29.8 in. (75.8 cm)Depth
SNS 3515: 37.9 lb. (17.2 Kg)
SNS 3595: 39.9 lb. (18.1 Kg)
Weight (fully loaded chassis)
Environmental Specifications
The following table lists the environmental specifications of the server.
SpecificationDescription
32 to 104°F (0 to 40°C)
(Operating, sea level, no fan fail, no CPU throttling,
turbo mode)
Temperature, operating
Cisco Secure Network Server 3500 Series Appliance Hardware Installation Guide
13
Before You Begin
Equipment Requirements
To Next Page
Loading...
Need help?
General