5-25
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
Chapter
Managing the User Options Web Pages
Step 8 Click Add Selected.
Associating a Phone with a User
To associate phones with the user, you must follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose User Management > End User.
The Find and List Users window displays.
Step 2 Enter the appropriate search criteria and click Find.
Step 3 In the list of records that display, click the link for the user.
Step 4 Click Device Association.
The User Device Association window displays.
Step 5 Enter the appropriate search criteria and click Find.
Step 6 Choose the device that you want to associate with the end user by checking the box to the left of the
device.
Step 7 Click Save Selected/Changes to associate the device with the end user.
Step 8 From Related Links drop-down list box in the upper, right corner of the window, select Back to User,
and click Go.
The End User Configuration window displays and the associated devices that you chose display in the
Controlled Devices pane.
Step 9 Click Save Selected/Changes.
Make sure to provide end users with the following information about the User Options web pages:
The URL required to access the application. This URL is:
http://<server_name:portnumber>/ccmuser/, where server_name is the host name of the
Cisco
Unified Communications Manager.
• A user ID and default password are needed to access the application.
These settings correspond to the values you entered when you added the user to Cisco Unified
Communications Manager (see the
“Adding Users to Cisco Unified Communications Manager”
section on page 5-23).
For additional information, see the following:
• Cisco Unified Communications Manager Administration Guide, User Group Configuration.
• Cisco Unified Communications Manager Administration Guide, End User Configuration.
To Next Page
Loading...
Need help?
General
