Cisco 6921 Administration Guide

4-4
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
Chapter
Network Setup Menu
• Unlocking and Locking Options, page 4-3
• Network Setup Menu, page 4-4
Network Setup Menu
The Network Setup menu provides options for viewing and making a variety of network settings.
Table 4-1 describes these options and, where applicable, explains how to change them.
For information about how to access the Network Setup menu, see the “Displaying a Configuration
Menu” section on page 4-2.
For information about the keys you can use to edit options, see the “Editing Values” section on page 4-3.
Table 4-1 Network Setup Menu Options
Option Description To Change
IPv4 Setup In the IPv4 Setup submenu, you can do the following:
• Enable or disable the phone to use the IP address that
is assign by the DHCP server.
• Manually set the IP Address, Subnet Mask, Default
Routers, DNS Server, and Alternate TFTP servers.
For more information on the IPv4 address fields, refer to
Table 4-2.
Scroll to IPv4 Setup and press
Select.
IPv6 Setup In the IPv6 Setup submenu, you can do the following:
• Enable or disable the phone to use the IPv6 address
that is assign by the DHCPv6 server.
• Manually set the IPv6 Address, Subnet Prefix Length,
IPv6 DNS Server, and IPv6 TFTP Servers.
For more information on the IPv6 address fields, refer to
Table 4-3.
Scroll to IPv6 Setup and press
Select.
Host Name Unique host name that the DHCP server assigned to the
phone.
Display only—Cannot configure.
Domain Name Name of the Domain Name System (DNS) domain in
which the phone resides.
1. Set the DHCP Enabled option to
No.
2. Scroll to the Domain Name
option, press the Edit softkey,
and then enter a new domain
name.
3. Press the Apply softkey, then
press Save.

Cisco 6921 Specifications

General

Brand	Cisco
Model	6921
Category	IP Phone
Language	English