CHAPTER
7-1
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
7
Viewing Model Information, Status, and
Statistics on the Cisco Unified IP Phone
This chapter describes how to use the following menus on the Cisco Unified IP Phone 6921, 6941, 6945,
and 6961 to view model information, status messages, and network statistics for the phone:
• Model Information screen—Displays hardware and software information about the phone. For more
information, see the
“Model Information Screen” section on page 7-1.
• Status menu—Provides access to screens that display the status messages, network statistics, and
statistics for the current call. For more information, see the
“Status Menu” section on page 7-2.
You can use the information on these screens to monitor the operation of a phone and to assist with
troubleshooting.
You can also obtain much of this information, and obtain other related information, remotely through
the phone’s web page. For more information, see Chapter 8, “Monitoring the Cisco Unified IP Phone
Remotely.”
For more information about troubleshooting the Cisco Unified IP Phone 6921, 6941, 6945, and 6961,
see Chapter 9, “Troubleshooting and Maintenance.”
This chapter includes these topics:
• Model Information Screen, page 7-1
• Status Menu, page 7-2
Model Information Screen
The Model Information screen includes the options described in Table 7-1.
To display the Model Information screen, press the Applications button and then select Phone
Information.
To exit the Model Information screen, press the Exit softkey.
Table 7-1 Model Information Settings for the Cisco Unified IP Phone 6900 Series
Option Description To Change
Model Number Model number of the phone. Display only—cannot configure.
IP Address IP address of the phone. Display only—cannot configure.
MAC Address MAC address of the phone. Display only—cannot configure.
To Next Page
Loading...
Need help?
General
