Cisco 7942G Administration Guide

4-17
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
NTP Configuration Menu
The NTP Configuration menu displays information about the NTP server and mode configuration used
by the phone.
Table 4-11 describes the options on this menu.
UI Configuration Menu
The UI Configuration menu displays the status of various user interface features on the phone.
Table 4-12 describes the options on this menu.
Network Locale
Ve r s i o n
Version of the network locale loaded on the
phone.
Display only—cannot configure.
NTP Configuration
(SIP phones only)
Menu to view information on NTP server and
mode configuration. For more information, see
NTP Configuration Menu, page 4-17.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
Table 4-10 Locale Configuration Menu Options (continued)
Option Description To Change
Ta b l e 4-11 NTP Configuration Menu Options
Option Description To Change
NTP Server 1 IP address of the primary NTP server. Use Cisco Unified Communications Manager
Administration to modify.
NTP Server 2 IP address of the secondary or backup NTP
server.
Use Cisco Unified Communications Manager
Administration to modify.
NTP Mode 1 Primary server mode. Supported modes are
Directed Broadcast, Unicast, Multicast, Any cast.
Use Cisco Unified Communications Manager
Administration to modify.
NTP Mode 2 Secondary server mode. Supported modes are
Directed Broadcast, Unicast, Multicast, Any cast.
Display only—cannot configure.
Ta b l e 4-12 UI Configuration Menu Options
Option Description To Change
Personalization Indicates whether the phone has been enabled for
configuring custom ring tones and wallpaper
images.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Auto Line Select Indicates whether the phone shifts the call focus
to incoming calls on all lines.
When this option is disabled, the phone only
shifts the call focus to incoming calls on the line
that is in use. When this option is enabled, the
phone shifts the call focus to the line with the
most recent incoming call.
Default: Disabled
From Cisco Unified Communications Manager
Administration, choose
Device
> Phone > Phone Configuration.

Cisco 7942G Specifications

General

Brand	Cisco
Model	7942G
Category	IP Phone
Language	English