Cisco 7942G Administration Guide

4-22
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Security Configuration Menu
The Security Configuration menu that you display from the Device Configuration menu displays settings
that relate to security for the phone.
Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For
information about the security options on that menu, see the
“Security Configuration Menu” section on
page 4-27.
Table 4-15 describes the options on the Security Configuration menu.
Ta b l e 4-15 Security Configuration Menu Options
Option Description To Change
PC Port Disabled Indicates whether the access port on the phone is
enabled (Yes) or disabled (No).
Must be set to enabled for video support on the
phone
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
GARP Enabled Indicates whether the phone learns MAC
addresses from Gratuitous Address Resolution
Protocol (ARP) responses. Disabling the phone’s
ability to accept Gratuitous ARP will prevent
applications that use this mechanism to monitor
and record voice streams from working. If voice
monitoring is not desired, set this option to No
(disabled).
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Vo i c e V L A N
Enabled
Indicates whether the phone allows a device
attached to the access port to access the Voice
VLAN. Setting this option to No (disabled)
prevents the attached PC from sending and
receiving data on the Voice VLAN. This setting
also prevents the PC from receiving data sent and
received by the phone. Set this setting to Yes
(enabled) if an application that requires
monitoring of the phone’s traffic is running on the
PC. These applications include monitoring and
recording applications and network monitoring
software.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Web Access
Enabled
Indicates whether web access is enabled (Yes) or
disabled (No) for the phone.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Security Mode Displays the security mode that is set for the
phone.
Use Cisco Unified Communications Manager
Administration to modify.
Logging Display For use by the Cisco Technical Assistance Center (TAC), if necessary.

Cisco 7942G Specifications

General

Brand	Cisco
Model	7942G
Category	IP Phone
Language	English