Cisco 7961G Phone Guide

Basic Call Handling
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0 27
Making Conference Calls
Your Cisco Unified IP Phone allows you to combine three or more separate calls into one conversation,
creating a conference call.
Understanding Types of Conference Calls
There are two types of conference calls: Standard (ad hoc) and Meet-Me.
Standard Conference Calls
You can create a standard conference in different ways, depending on your needs and the
programmable buttons or softkeys available on your phone:
• Confrn or Conference—Use this softkey or programmable line button to establish a standard
conference by calling each participant. Standard conference calling is a default feature available
on most phones.
• Join—Use this softkey to establish a standard conference by joining several calls already on one
line. (SCCP phones only)
• cBarge—Use this softkey to add yourself to an existing call on a shared line and to turn the call
into a standard conference call. This feature is available only on phones that use shared lines.
See Starting and Joining a Standard Conference, page 28, for additional instructions.
Meet-Me Conference Calls
You can create a Meet-Me conference by calling the Meet-Me phone number at a specified time.
See Starting or Joining a Meet-Me Conference Call, page 30, for additional instructions.
Turn off DND Press DND or
Do Not Disturb .
Customize DND settings If your system administrator configured DND settings to appear
on the User Options page, follow these steps:
1. Log in to your User Options web pages. See Accessing Your
User Options Web Pages, page 56.
2. From the drop-down menu, choose User Options > Device.
3. Set the following options:
– Do Not Disturb—Set to enable/disable DND.
– DND Incoming Call Alert—Set the alert to beep only,
flash only, or disable all visible and audible alert
notifications.

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English