Cisco 8845 Administration Guide

Factory Reset the Phone with the Web UI Button
You can factory reset the phone from the phone web page. The reset only happens if the phone is idle. If the
phone is not idle, the phone web page shows a message that the phone is busy and that you need to try again.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Admin Login > advanced > Info > Debug Info.
Step 2 In the Factory Reset section, click Factory Reset.
Step 3 Click Confirm factory reset.
Set up a Secure Extension
You can configure an extension to only accept secure calls. If the extension is configured to only accept secure
calls then any calls the extension makes will be secure.
You can also configure a secured extension with XML services. Enter a string in this format:
<Secure_Call_Serv ua="na">Yes</Secure_Call_Serv>
<Secure_Call_Option_1_ ua="na">Optional</Secure_Call_Option_1_>
Before you begin
• Make sure that Secure Call Serv is enabled (set to Yes) in the Supplementary Services area on the
Voice > Phone tab.
• Make sure that SIP Transport parameter of the extension is set to TLS.
• Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > Ext(n).
Step 2 In the Call Feature Settings section, in the Secure Call Option field, choose Optional to retain the current
secure call option for the phone, or Required to reject nonsecure calls from other phones.
Step 3 Click Submit All Changes.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
216
Cisco IP Phone Administration
Factory Reset the Phone with the Web UI Button

Cisco 8845 Specifications

General

Brand	Cisco
Model	8845
Category	IP Phone
Language	English