Cisco A9K-48X10GE-1G-SE User Manual

8-Port 10-Gigabit Ethernet 80 Gbps Line Rate Card with XFP
The 8-Port 10-Gigabit Ethernet (GE) 80 Gbps line rate card provides eight cages for XFP Ethernet optical
interface modules that operate at a rate of 10 Gbps. The eight XFP modules can be10GE multimode connections.
The 8-Port 10GE line card is a full 80 Gbps line rate card.
The 8-Port 10GE 80 Gbps line rate card is available in base, extended, and low-queue versions. All versions
are functionally equivalent, but vary in configuration scale and buffer capacity.
Each XFP cage on the 8-Port 10GE 80 Gbps line rate card has an adjacent Link LED visible on the front
panel. The Link LED indicates the status of the associated XFP port, as described in Line Card LEDs, on page
138. See Technical Specifications, on page 147 for a list of all XFPs supported on the 8-Port 10GE 80 Gbps
line rate card.
The following figure shows the 8-Port 10GE 80 Gbps line rate card front panel and connectors.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
21
Overview
8-Port 10-Gigabit Ethernet 80 Gbps Line Rate Card with XFP

Cisco A9K-48X10GE-1G-SE Specifications

General

Brand	Cisco
Model	A9K-48X10GE-1G-SE
Category	Network Router
Language	English