Cisco ASA 5510 User Manual

43
Step 7: View VPN Attributes and Complete Wizard.
Review the configuration list for the VPN tunnel you just created. If you are satisfied with the
configuration, click Finish to apply the configuration changes to the adaptive security appliance.
This concludes the configuration process for ASA 1.
What to Do Next
You have just configured the local adaptive security appliance. Now you need to configure the adaptive
security appliance at the remote site.
At the remote site, configure the second adaptive security appliance to serve as a VPN peer. Use the
procedure you used to configure the local adaptive security appliance, starting at Step 1: Configure the
adaptive security appliance at the first site on page 36, and finishing with Step 7: View VPN Attributes
and Complete Wizard on page 43.
Note When configuring ASA 2, enter the exact same values for each of the options that you selected
for ASA 1. Mismatches are a common cause of VPN configuration failures.

Cisco ASA 5510 Specifications

General

Brand	Cisco
Model	ASA 5510
Category	Firewall
Language	English