(10.21.0.110).
.Dec 22 22:22:35.812: NTP Core(DEBUG):
ntp_receive: message received
.Dec 22 22:22:35.812: NTP Core(DEBUG):
ntp_receive: peer is 0x7FD044C809B0, next action is
1.
.Dec 22 22:22:35.812: NTP Core(DEBUG): Peer
becomes reachable, poll set to 6.
.Dec 22 22:22:35.812: NTP Core(INFO): 10.24.0.1
8014 84 reachable
.Dec 22 22:22:35.812: NTP Core(INFO): 10.24.0.1
902D 8D popcorn popcorn
.Dec 22 22:22:37.112: \%HA_EM-6-LOG: cli_log:
host[ASR1001X] user[script] port[0] exec_lvl[15]
command[show ntp status ] Executed
.Dec 22 22:22:37.811: NTP message sent to
10.24.0.1, from interface 'GigabitEthernet0/0/0'
(10.21.0.110).
.Dec 22 22:22:37.812: NTP message received from
10.24.0.1 on interface 'GigabitEthernet0/0/0'
(10.21.0.110).
.Dec 22 22:22:37.812: NTP Core(DEBUG):
ntp_receive: message received
.Dec 22 22:22:37.812: NTP Core(DEBUG):
ntp_receive: peer is 0x7FD044C809B0, next action is
1.
.Dec 22 22:22:37.812: NTP Core(INFO): 10.24.0.1
963A 8A sys_peer
.Dec 22 22:22:37.812: NTP:
step(0xF164A290.06E65E00): local_offset =
0x00000000.00000000, curtime =
0xE74F9D7D.CFDF3DA0
.Mar 18 14:18:53.838: NTP Core(NOTICE): trans
state : 5
*Jul 7 18:43:14.595: %MKA-3-
MKPDU_VALIDATE_FAILURE: (Gi0/0/1 : 11)
Validation of a MKPDU failed for RxSCI
6412.25a1.a409/0009, AuditSessionID , CKN
1234000000000000000000000000000000000000000
000000000000000000000
Use of the “upgrade” command.
*Jul 10 11:04:09.179: %PARSER-5-
CFGLOG_LOGGEDCMD: User:cisco logged
command:upgrade
*Jul 10 11:04:09.179: %PARSER-5-
CFGLOG_LOGGEDCMD: User:cisco logged