Need help?Do you have a question about the Cisco ASR 1002 and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.3 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| DHCP client | - |
| Supported network protocols | BGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM |
| Ethernet LAN (RJ-45) ports | 4 |
| Security algorithms | SSH |
| VPN tunnels quantity | 8000 |
| Safety | UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1 |
| Certification | FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3 |
| Internal memory | 4096 MB |
| AC input voltage | 85 - 264 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 560 W |
| Operating altitude | 0 - 3048 m |
| Storage temperature (T-T) | 0 - 50 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 5 - 90 % |
| Product color | Gray |
| Rack capacity | 2U |
Weight and Dimensions| Depth | 461 mm |
|---|---|
| Width | 437.4 mm |
| Height | 89 mm |
| Weight | - g |
To Next Page