EasyManuals Logo
Home>Cisco>Network Router>ASR 1002

Cisco ASR 1002 User Manual

Cisco ASR 1002
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Page 7 of 72
1 Introduction
This Operational User Guidance with Preparative Procedures documents the administration of
the Aggregation Services Router (ASR) 1000 Series (ASR), the TOE, as it was certified under
Common Criteria. The Aggregation Services Router (ASR) 1000 Series (ASR ) may be
referenced below as the model number series ex. ASR 1000, TOE, or simply router.
1.1 Audience
This document is written for administrators configuring the TOE. This document assumes that
you are familiar with the basic concepts and terminologies used in internetworking, and
understand your network topology and the protocols that the devices in your network can use,
that you are a trusted individual, and that you are trained to use the operating systems on which
you are running your network.
1.2 Purpose
This document is the Operational User Guidance with Preparative Procedures for the Common
Criteria evaluation. It was written to highlight the specific TOE configuration and administrator
functions and interfaces that are necessary to configure and maintain the TOE in the evaluated
configuration. This document is not meant to detail specific actions performed by the
administrator but rather is a road map for identifying the appropriate locations within Cisco
documentation to get the specific details for configuring and maintaining ASR operations. All
security relevant commands to manage the TSF data are provided within this documentation
within each functional section.
1.3 Document References
This document makes reference to several Cisco Systems documents. The documents used are
shown below in Table 2. Throughout this document, the guides will be referred to by the #,
such as [1].
Table 2: Cisco Documentation
#
Title
Link
[1]
Loading and Managing System Images
Configuration Guide
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sys-image-
mgmt/configuration/xe-16/sysimgmgmt-xe-16-book.html
[2]
Cisco ASR 1000 Series Router
Hardware Installation Guide, July
2013, OL-13208-11
http://www.cisco.com/c/en/us/td/docs/routers/asr1000/install/guide/asr
1routers/asr1higV8.html
[3]
Configuration Fundamentals
Configuration Guide
http://www.cisco.com/c/en/us/td/docs/ios-
xml/ios/fundamentals/configuration/xe-16/fundamentals-xe-16-
book.html

Table of Contents

Other manuals for Cisco ASR 1002

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1002 and is the answer not in the manual?

Cisco ASR 1002 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
DHCP client-
Supported network protocolsBGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports4
Security algorithmsSSH
VPN tunnels quantity8000
SafetyUL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
CertificationFCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory4096 MB
AC input voltage85 - 264 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)560 W
Operating altitude0 - 3048 m
Storage temperature (T-T)0 - 50 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 90 %
Product colorGray
Rack capacity2U
Weight and Dimensions IconWeight and Dimensions
Depth461 mm
Width437.4 mm
Height89 mm
Weight- g

Related product manuals