Cisco ASR 9001-S Hardware Installation Guide

3-21
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02
Chapter 3 Installing Modules and Cables in the Chassis
Powering on the Router
Figure 3-12 Typical Power Connections for a Single DC Power Module
Step 4
Proceed to the “Powering on the Router” section on page 3-21.
Powering on the Router
Use this procedure to turn on power to either an AC-powered or DC-powered router:
Step 1 Power on the circuit breaker to your power sources.
Step 2 Verify that the Power Input LED on each power module is lit.
Step 3 Set the power switch to the ON position.
Step 4 Verify that the Green Power LED on each power module is lit.
331933

Cisco ASR 9001-S Specifications

General

Brand	Cisco
Model	ASR 9001-S
Category	Network Router
Language	English