Cisco ASR 9006 Unpacking And Installing

Step 4 Slide out the fan tray completely from the chassis while supporting it with your other hand.
Use two hands when handling the fan tray. The fan tray weighs about 11.0 pounds (4.99 kg).
Caution
Figure 18: Removing or Installing the Fan Tray on the Cisco ASR 9904 Router Chassis
Removing a Fan Tray from the Cisco ASR 9906 Router
Follow these steps to remove a fan tray from the Cisco ASR 9906 Router (see the figure below).
Procedure
Step 1 Loosen the screws that secure the fan tray door to the chassis and open the door.
Step 2 Loosen the captive installation screw on the front of the fan tray.
Step 3 Using the handle on the front panel, pull the fan tray halfway out of the chassis.
Step 4 Wait for all the fans to stop rotating.
Step 5 Slide out the fan tray completely from the chassis while supporting it with your other hand.
Use two hands when handling the fan tray. The fan tray weighs about 8.0 pounds (3.63 kg).
Caution
Unpacking and Installing the Chassis
25
Unpacking and Installing the Chassis
Removing a Fan Tray from the Cisco ASR 9906 Router

Cisco ASR 9006 Specifications

General

Brand	Cisco
Model	ASR 9006
Category	Network Router
Language	English