Cisco ASR 9006 Unpacking And Installing

Step 4 Remove components, such as line cards, power supplies, and the fan tray, to reduce the weight before lifting
or moving the chassis. See Removing Components Before Installing the Chassis, on page 20 for more
information.
Step 5 Save the packaging materials in case the router needs repackaging or shipping.
Unpacking the Cisco ASR 9010 Router
Follow these steps to unpack the Cisco ASR 9010 Router from its shipping container.
Procedure
Step 1 Cut the straps that secure the cardboard shipping container to the pallet.
Step 2 Remove the cardboard shipping container.
Step 3 Remove the packaging material.
a) Remove the foam packaging material from the top of the router.
b) Remove all screws that secure the four hold-down brackets to the router chassis. The forward hold-down
brackets are secured to the router mounting brackets by two screws. The rear hold-down brackets are
secured to the chassis by four screws. Save these four screws used to hold the rear bracket to the chassis
to use later to attach the ground strap.
Step 4 Remove two bolts per hold-down bracket that secure the brackets to the pallet.
Unpacking and Installing the Chassis
5
Unpacking and Installing the Chassis
Unpacking the Cisco ASR 9010 Router

Cisco ASR 9006 Specifications

General

Brand	Cisco
Model	ASR 9006
Category	Network Router
Language	English