Cisco ASR 920 series Installing Manual

Figure 17: Installing the Fan Tray in the Chassis
Step 2 Push the fan assembly into the chassis until the power connector seats in the backplane and the captive
installation screws make contact with the chassis.
Step 3 Tighten the captive installation screws, using a flat-blade or number 2 Phillips-head screwdriver.
Removing the Fan Tray
To remove the existing fan assembly, follow these steps:
When removing the fan tray, keep your hands and fingers away from the spinning fan blades. Let the fan
blades stop completely before you remove the fan tray.
Caution
Unplug all power sources before performing this procedure.
Caution
Always wear the ESD wrist strap when installing or uninstalling the fan tray.
Caution
Installing the Cisco ASR 920 Series Router
20
Installing the Cisco ASR 920 Series Router
Removing the Fan Tray

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English