EasyManuals Logo
Home>Cisco>Network Hardware>C1111x-8P

Cisco C1111x-8P User Manual

Cisco C1111x-8P
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Connect to the Console Port with Mac OS X
This procedure describes how to connect a Mac OS X system USB port to the console using the built in OS
X Terminal utility.
Step 1 Use the Finder to go to Applications > Utilities > Terminal.
Step 2 Connect the OS X USB port to the router.
Step 3 Enter the following commands to find the OS X USB port number
Example:
macbook:user$ cd /dev
macbook:user$ ls -ltr /dev/*usb*
crw-rw-rw- 1 root wheel 9, 66 Apr 1 16:46 tty.usbmodem1a21 DT-macbook:dev user$
Step 4 Connect to the USB port with the following command followed by the router USB port speed
Example:
macbook:user$ screen /dev/tty.usbmodem1a21 9600
To disconnect the OS X USB console from the Terminal window
Enter Ctrl-a followed by Ctrl-\
Connect to the Console Port with Linux
This procedure shows how to connect a Linux system USB port to the console using the built in Linux Terminal
utility.
Step 1 Open the Linux Terminal window.
Step 2 Connect the Linux USB port to the router.
Step 3 Enter the following commands to find the Linux USB port number.
Example:
root@usb-suse# cd /dev
root@usb-suse /dev# ls -ltr *ACM*
crw-r--r-- 1 root root 188, 0 Jan 14 18:02 ttyACM0
root@usb-suse /dev#
Step 4 Connect to the USB port with the following command followed by the router USB port speed
Example:
root@usb-suse /dev# screen /dev/ttyACM0 9600
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
54
Install and Connect the Router
Connect to the Console Port with Mac OS X

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco C1111x-8P and is the answer not in the manual?

Cisco C1111x-8P Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
Frequency range2.4 - 5 GHz
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1Q, IEEE 802.1ag
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB version3.2 Gen 1 (3.1 Gen 1)
Ethernet LAN (RJ-45) ports8
Installed SFP modules quantity4
Fast Ethernet (copper) ports quantity1
Power over Ethernet (PoE) ports quantity6
Security algorithms3DES, 128-bit AES, 256-bit AES, DES
Authentication methodRSA (748/1024/2048 bit), ECDSA (256/384 bit); Integrity: MD5, SHA, SHA-256, SHA-384, SHA512
Routing protocolsVRRP
Data link protocolsHDLC
Supported protocolsIPv4, IPv6, RIP, RIPv2, OSPF, EIGRP, BGP, IS-IS, IGMPv3, PIM SM, SSM, RSVP, ERSPAN, IPSLA, EEM, IKE, ACL, EVC, DHCP, FR, DNS, LISP, HSRP, RADIUS, AAA, AVC, DVMRP, MPLS, IPsec, L2TPv3, BFD
Switching protocolsRFC 2338
IPv4 & IPv6 featuresDual stack IPv4/IPv6
Supported network protocolsACL, NAT, QoS, BFD, VRF Lite, IP SLA
Antenna typeExternal
Antennas quantity2
Product colorGray
LED indicatorsLink, Status
Country of originCzech Republic
Flash memory4000 MB
CertificationUL 60950-1.and EN 60950-1. CAN/CSA C22.2 No. 60950-1. CB to IEC 60950-1, 2
Internal memory typeDRAM
Output voltage12 V
AC input voltage100 - 240 V
Power source typeAC, PoE
AC input frequency50 - 60 Hz
Power consumption (typical)66 W
Operating altitude0 - 3000 m
Non-operating altitude0 - 4570 m
Storage temperature (T-T)-4 - 149 °C
Operating temperature (T-T)32 - 104 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 85 %
Package typeBox
Package depth508 mm
Package width342.9 mm
Package height162.052 mm
Package weight3455.78 g
Quantity per pack1 pc(s)
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width323 mm
Height44 mm
Weight1940 g

Related product manuals