CHAPTER 3
Rack-Mount the Chassis
• Unpack and Inspect the Chassis, on page 31
• Rack-Mount the Chassis, on page 31
Unpack and Inspect the Chassis
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or
any items are missing, contact your customer service representative immediately. Keep the shipping
container in case you need to send the chassis back due to damage.
Note
See Package Contents, on page 3 for a list of what shipped with the chassis.
Step 1 Remove the chassis from its cardboard container and save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3 Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Rack-Mount the Chassis
Before you begin
You can install the chassis in a rack using the Cisco rack kit (part number 800-43376-02).
Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide
31
To Next Page
Loading...
Need help?
General
