Cisco Catalyst 4948 User Manual

Chapter 10: Server Load Balancing (SLB) 157
Section 10-1
(real-server) faildetect numconns 4
(real-server) retry 30
(real-server) inservice
(real-server) exit
(server-farm) real 192.168.250.11
(real-server) weight 16
(real-server) faildetect numconns 4
(real-server) retry 30
(real-server) inservice
(real-server) exit
(server-farm) real 192.168.250.12
(real-server) weight 8
(real-server) faildetect numconns 4
(real-server) retry 30
(real-server) inservice
(real-server) exit
(global) ip slb vserver VSERVER1
(virtual-server) serverfarm FARM1
(virtual-server) virtual 10.10.10.101 tcp www
(virtual-server) sticky 60 group 1
(virtual-server) advertise active
(virtual-server) inservice
(virtual-server) exit
(global) ip slb dfp password 0 test123
(slb-dfp) agent 192.168.250.10 2000
(slb-dfp) agent 192.168.250.11 2000
(slb-dfp) agent 192.168.250.12 2000
(slb-dfp) exit
(global) probe HTTP1 http
(probe) interval 120
(probe) port 80
(probe) request method get
(probe) exit
Displaying Information About SLB
Table 10-1 lists some switch commands that you can use to display helpful information
about SLB configuration and status.

Cisco Catalyst 4948 Specifications

General

Brand	Cisco
Model	Catalyst 4948
Category	Switch
Language	English