Cisco Catalyst 6840 Series User Manual

APPENDIX C
Repacking the Switch
If you need to return or move the switch chassis, follow these steps to repack the switch using the original
packaging material.
Procedure
Step 1 Set the chassis in the bottom pallet.
Figure 39: Packing Material
Step 2 Place the packing bag over the chassis.
Step 3 Place the front-packing material and power supply packing material around the chassis.
Step 4 Place the power supplies in the spaces provided in the power supply packing material.
Step 5 Place the top-packing material over the top of the chassis and power supplies.
Step 6 Place the rack-mount kit and the accessory kit on the top-packing material.
You must include the accessory kit for the final packaging to fit properly.
Note
Step 7 Place the outside carton over the entire package.
Step 8 Fold the outside carton down over the top and seal with packing tape.
Catalyst 6840-X Switch Series Hardware Installation Guide
77

Cisco Catalyst 6840 Series Specifications

General

Brand	Cisco
Model	Catalyst 6840 Series
Category	Switch
Language	English