Cisco Catalyst 9407R User Manual

--Power supply fully inserted into the chassis;
power cord and retainer strapped into place.
1
Step 8 Set the power switch to the on (|) position
Step 9 Verify the module's operation by performing the steps described here: Verifying the Power Supply Module
Installation, on page 127.
Power Cord Retainer Mechanism
This section shows how to correctly operate the power cord retainer, to tighten or loosen it while installing
or removing the power supply module.
Some of the illustrations do not include the power supply module, for the sake of clarity. The retainer is
otherwise permanently fixed to the power supply module.
Note
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
105
Removing and Replacing FRUs
Power Cord Retainer Mechanism

Cisco Catalyst 9407R Specifications

General

Brand	Cisco
Model	Catalyst 9407R
Category	Switch
Language	English