Cisco Catalyst 9600 Series User Manual

DateTimeVerified
By
ActivityTask No.
EMI evaluation
• Distance limitations for signaling
• Site wiring
• RFI levels
6
2
Verify that each power supply installed in the chassis has a dedicated AC source circuit.
3
Refer to the power supply'VA rating as a sizing criteria in determining the output required by the UPS.
The power supply kVA rating value is listed in the specifications table for each power supply in Appendix
A (power supply specifications).
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
27
Preparing for Installation
Site Preparation Checklist

Cisco Catalyst 9600 Series Specifications

General

Brand	Cisco
Model	Catalyst 9600 Series
Category	Switch
Language	English