Cisco Catalyst 9600 Series User Manual

SpecificationItem
Hot to cold—at a maximum rate of 86°F (30°C) per hour
Cold to hot—at maximum rate of 204.8°F (96°C) per hour
Thermal transition
Operating, nonoperating and storage —10 to 95 percentHumidity (RH), ambient
(noncondensing)
-60 to 3000m (-197 to 9843 feet)Altitude (operating and
nonoperating)
LwAD—74.7 dBA
This is with four power supply modules installed and delivering 50 percent of
rated output power; measured according to International Organization for
Standardization (ISO) 7779 and declared according to ISO 9296.
Sound power level
(LwAD)
Chassis—Right to left (when facing the front of the chassis)
Power supply—Front to back (forward air flow)
Airflow
Operating—5G 11ms (Half-sine)
Nonoperating and storage— 15G 11ms (Half-sine)
Shock
• Operating— 0.15G (10Hz-500Hz)
• Nonoperating and storage— 0.8G (10Hz-500Hz)
Sine Vibration
SlopeAcceleration Spectral
Density
Spectral Break Point
Frequencies
Random Vibration
(Operating)
6 db /octave-2.5 – 5 Hz
-0.1 [(m/s²)²]/Hz
(0.001 g²/Hz)
5 – 100 Hz
-24 db /octave-100 – 200 Hz
Slope
Acceleration Spectral
Density
Spectral Break Point
Frequencies
Random Vibration
(Nonoperating and
Storage)
6 db /octave-2.5 – 5 Hz
-1.0 [(m/s²)²]/Hz*
(0.01 g²/Hz)
5 – 100 Hz
-24 db /octave-100 – 200 Hz
5
Minimum ambient temperature for cold startup is 0ºC
6
Short-term exceptional conditions are for no longer than a one-year period of—96 consecutive hours,
or 360 hours total, or 15 occurrences.
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
92
Technical Specifications
Technical Specifications

Cisco Catalyst 9600 Series Specifications

General

Brand	Cisco
Model	Catalyst 9600 Series
Category	Switch
Language	English