Cisco Catalyst IE-3400H-24FT User Manual

Front Panel of the Switch
This section describes the front panel components. The following figures depict the components available on
the various models in this product family. Not all models are illustrated.
Figure 2: Catalyst IE3400H Front Panel
Console Port (left)
Alarm Port (right)
6Switch Status
LEDs
1
Ground Lug7Ethernet ports2, 3,
4
SD Card Cover8Power Input Port5
10/100BASE-T Ports
You can set the 10/100BASE-T ports to operate at 10 or 100 Mb/s over IP standard M12 cabling. The ports
can operate in full-duplex, half-duplex, autonegotiate (default), or never half-duplex mode.
A Never Half Duplex option for a port functions as the name implies, the link is never established at half
duplex; it is either full-duplex or no link. Never Half Duplex avoids the unpredictable response times that in
a CSMA/CD network can cause safety features to trip or interruptions that require restarting the process flow.
Cisco Catalyst IE3400 Heavy Duty Series Hardware Installation Guide
3
Product Overview
Front Panel of the Switch

Cisco Catalyst IE-3400H-24FT Specifications

General

Brand	Cisco
Model	Catalyst IE-3400H-24FT
Category	Switch
Language	English