D-2
Cisco Physical Security Multiservices Platform Series User Guide
OL-21838-03
Appendix D 16 x CIF / 4 x 4CIF Video Capture Card
Power and System Requirements
• The video card supports up to 16 video inputs per card.
• Each video card has two DB-15 connectors, each of which allows the connection of a video cable
that contains nine individual coaxial cables with BNC connectors. Eight of the BNC connectors are
for video input and one is for video output. Video output is not supported.
• When installed in the Cisco Multiservices Platform Series 1-RU model (see Figure D-1), the DB-15
connector on the left supports video inputs 1 through 8. The DB-15 connector on the right supports
video inputs 9 through 16.
Power and System Requirements
1.9A at 5V, 2.6A at 3.3V, 18W total.
To Next Page
Loading...
Need help?
General
