Cisco CRS-1 - Carrier Routing System Router Configuration Guide

Implementing IPSec Network Security on Cisco IOS XR Software
Additional References
SC-103
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
OL-20382-01
Additional References
The following sections provide references related to implementing IPSec network security.
Related Documents
Standards
MIBs
Related Topic Document Title
IPSec network security commands: complete
command syntax, command modes, command history,
defaults, usage guidelines, and examples
IPSec Network Security Commands on Cisco IOS XR Software
module in Cisco
IOS XR System Security Command Reference
Internet Key Exchange (IKE) security protocol
commands: complete command syntax, command
modes, command history, defaults, usage guidelines,
and examples
Internet Key Exchange Security Protocol Commands on
Cisco
IOS XR Software module in Cisco IOS XR System Security
Command Reference
IP-Sec-related object tracking commands: complete
command syntax, command modes, command history,
defaults, usage guidelines, and examples
Cisco IOS XR System Management Command Reference
Object tracking configuration procedures, including
examples
Cisco IOS XR System Management Configuration Guide
IPSec in Quality of Service (QoS) Cisco IOS XR Modular Quality of Service Configuration Guide
MPLS distribution protocol Cisco IOS XR MPLS Configuration Guide
Standards Title
No new or modified standards are supported by this
feature, and support for existing standards has not been
modified by this feature.
—
MIBs MIBs Link
— To locate and download MIBs using Cisco IOS XR software, use the
Cisco MIB Locator found at the following URL and choose a
platform under the Cisco Access Products menu:
http://cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English