Cisco CRS-1 - Carrier Routing System Router Configuration Guide

Implementing Internet Key Exchange Security Protocol on Cisco IOS XR Software
How to Configure the ISAKMP Profile
SC-137
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
OL-20382-01
Clearing a Crypto Session
Use the clear crypto session command in EXEC mode to delete the crypto sessions (IP Security [IPSec]
and Internet Key Exchange [IKE] security associations [SAs]) for users and groups.
How to Configure the ISAKMP Profile
This task configures the ISAKMP profile (which is a repository of commands for a set of peers) for either
a service interface or a tunnel interface.
Note The Cisco CRS-1 Router supports only tunnel interfaces.
SUMMARY STEPS
1. configure
2. crypto isakmp profile [local ] profile-name
3. description string
Step 4
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-isakmp-peer)# end
or
RP/0/RP0/CPU0:router(config-isakmp-peer)# commit
Saves configuration changes.
• When you issue the end command, the system
prompts you to commit changes:
Uncommitted changes found, commit them
before exiting (yes/no/cancel)?
[cancel]:
– Entering yes saves configuration changes to
the running configuration file, exits the
configuration session, and returns the
router to EXEC mode.
– Entering no exits the configuration session
and returns the router to EXEC mode
without committing the configuration
changes.
– Entering cancel leaves the router in the
current configuration session without
exiting or committing the configuration
changes.
• Use the commit command to save the
configuration changes to the running
configuration file and remain within the
configuration session.
Step 5
show crypto isakmp peers [ip-address | vrf vrf-name]
Example:
RP/0/RP0/CPU0:router# show crypto isakmp peers
Displays peer descriptions.
Command or Action Purpose

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English