Cisco CRS-1 - Carrier Routing System Router Configuration Guide

Configuring AAA Services on Cisco IOS XR Software
Additional References
SC-58
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
OL-20382-01
For line template vty, a line password is assigned that is used with line authentication and makes
usergroup uga the group that is assigned for line authentication (if used), and makes vty-authen,
vty-author, and vty-acct, respectively, the method lists that are used for authentication, authorization,
and accounting.
line template vty
password lab
users group uga
login authentication vty-authen
authorization commands vty-author
accounting commands vty-acct
exit
A TACACS+ server group named abc is created and an already configured TACACS+ server is added to
it.
aaa group server tacacs+ abc
server 3.3.3.3
exit
Additional References
The following sections provide references related to configuring AAA services.
Related Documents
Standards
MIBs
Related Topic Document Title
AAA services commands: complete command
syntax, command modes, command history,
defaults, usage guidelines, and examples
Authentication, Authorization, and Accounting Commands on
Cisco
IOS XR Software module in Cisco IOS XR System Security
Command Reference
Standards Title
No new or modified standards are supported by this
feature, and support for existing standards has not been
modified by this feature.
—
MIBs MIBs Link
— To locate and download MIBs using Cisco IOS XR software, use the
Cisco MIB Locator found at the following URL and choose a
platform under the Cisco Access Products menu:
http://cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English