Top Panel Description
Two buttons and LEDs on the top panel of the Residential Gateway show the status
of the Wireless Protected Setup (WPS) and Page features.
1 WPS (WIRELESS PROTECTED SETUP)—OFF (normal condition) Wireless
Protected Setup is not active. Blinking indicates the button has been pressed and
WPS is active so that a new wireless client can be added to the wireless network.
2 PAGE—OFF (normal condition) indicates the Page feature is not active. Slow
blinking indicates the unit is on and communicating with registered telephone
receivers (only CAT-iq 2.0 handsets). Fast blinking indicates that the unit is
transmitting data to registered handsets. To register the unit with a handset,
press the button for 15 seconds. After the unit and handset have registered, press
the button for up to 3 seconds to page registered handsets; press the button again
for up to 3 seconds to stop paging registered handsets.
Important: Use the Page feature only with Cordless Advanced Technology
(CAT-iq 2.0 handsets). To learn more about CAT-iq 2.0 handsets, contact your
service provider.
To Next Page
Loading...
Need help?
General