Configure Wireless Settings
Setting up the Wireless Residential Gateway for wireless communication provides
you with the freedom to connect to the Internet from any location within range of
the Wireless Access Point (WAP) without having to use wired connections. This
section provides procedures for configuring the WAP to meet your needs. These
options are available as tabs on the Gateway > Connection > WiFi page.
Private WiFi Network - Use this page to choose the wireless network mode that
the Wireless Residential Gateway will use to set up other basic features including
Security mode and Network Password.
MAC Filter Settings- Use this page to configure MAC address filtering for your
wireless network separately for 2.4 GHz and 5 GHz networks.
Add WPS Client - Use this page to manually set up and connect WPS clients
with the WPS PIN method and Push Button.
Log in to the Residential Gateway
1 On your PC, open the web browser that you prefer to use.
2 In the web address (URL) field, enter http://10.0.0.1 and press the Enter key.
3 When prompted, enter the following username and password:
Username: admin
Password: password
To Next Page
Loading...
Need help?
General