EasyManuals Logo
Home>Cisco>Gateway>EPC3925

Cisco EPC3925 User Manual

Cisco EPC3925
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
4021192 Rev B 21
Where Is the Best Location for My DOCSIS Residential Gateway?
Where Is the Best Location for My DOCSIS Residential
Gateway?
The ideal location for your residential gateway is where it has access to outlets and
other devices. Think about the layout of your home or office, and consult with your
service provider to select the best location for your residential gateway. Read this
user guide thoroughly before you decide where to place your residential gateway.
Consider these recommendations:
Choose a location close to your computer if you will also use the residential
gateway for high-speed Internet service.
Choose a location that is near an existing RF coaxial connection to eliminate the
need for an additional RF coaxial outlet.
Choose a location for the residential gateway that is adjacent to your telephone
equipment if you are using only one or two pieces of telephone equipment.
Note: If you are using the residential gateway to provide service to several
telephones, a professional installer can connect the residential gateway to your
existing home telephone wiring. To minimize changes to the home telephone
wiring, you may want to locate the residential gateway near an existing
telephone outlet.
Choose a location that is relatively protected from accidental disturbance or
harm, such as a closet, basement, or other protected area.
Choose a location so that there is plenty of room to guide the cables away from
the modem without straining or crimping them.
Airflow around the residential gateway should not be restricted.
Read this user guide thoroughly before installing the residential gateway.

Other manuals for Cisco EPC3925

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco EPC3925 and is the answer not in the manual?

Cisco EPC3925 Specifications

General IconGeneral
Security algorithmsWEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Wi-FiYes
Modulation128-QAM, 16-QAM, 32-QAM, 64-QAM, 8-QAM, QPSK
Frequency band2.4 GHz
Networking standardsIEEE 802.11n
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports4
Input current1.5 A
Input voltage15 V
Input frequency50/60 Hz
Power requirements230 VAC
Power consumption (typical)17 W
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Voice codecsG.711, G.723, G.726, G.728, G.729, G.729A
Weight and Dimensions IconWeight and Dimensions
Weight430 g
Dimensions (WxDxH)176 x 145 x 45 mm

Related product manuals