Cisco EPC3925 User Manual

82 4021192 Rev B
Manage the Gateway
Administration > Reporting
Administration reporting allows you to email various system activities to your email
address.
Select the Reporting tab to open the Administration Reporting page.
Use the descriptions and instructions in the following table to configure the
reporting feature on the gateway. After you make your selections, click Save
Settings to apply your changes or Cancel Changes to cancel.
Section
Field Description
Reporting
E-Mail Alerts
If enabled, an e-mail will be sent immediately if any reportable
events are detected. To use this feature, provide the necessary e-
mail address information.
SMTP Mail Server
Enter the address (domain name) or IP address of the Simple Mail
Transport Protocol (SMTP) server you use for outgoing e-mail.
E-Mail Address for Alert Logs
Enter the e-mail address that should receive the logs.

Cisco EPC3925 Specifications

General

Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Wi-Fi	Yes
Modulation	128-QAM, 16-QAM, 32-QAM, 64-QAM, 8-QAM, QPSK
Frequency band	2.4 GHz
Networking standards	IEEE 802.11n
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	4
Input current	1.5 A
Input voltage	15 V
Input frequency	50/60 Hz
Power requirements	230 VAC
Power consumption (typical)	17 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Voice codecs	G.711, G.723, G.726, G.728, G.729, G.729A

Weight and Dimensions

Weight	430 g
Dimensions (WxDxH)	176 x 145 x 45 mm