Cisco Firepower 1010 Series User Manual

CHAPTER 3
Mount the Chassis
• Unpack and Inspect the Chassis, on page 31
• Desktop-Mount the Chassis, on page 32
• Wall-Mount the Chassis, on page 32
• Rack-Mount the Chassis, on page 35
Unpack and Inspect the Chassis
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately. Keep the shipping container in
case you need to send the chassis back due to damage.
Note
See Package Contents, on page 8 for a list of what shipped with the chassis.
Step 1 Remove the chassis from its cardboard container and save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3 Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Cisco Firepower 1010 Series Hardware Installation Guide
31

Cisco Firepower 1010 Series Specifications

General

Brand	Cisco
Model	Firepower 1010 Series
Category	Network Hardware
Language	English