Cisco Firepower 1140 Getting Started

Explicit, implied, or default
configurationConfigurationSetting
Implied.A rule trusting all traffic from the inside_zone to the outside_zone.
This allows without inspection all traffic from users inside your
network to get outside, and all return traffic for those connections.
The default action for any other traffic is to block it. This prevents
any traffic initiated from outside to enter your network.
Firepower 4100/9300: There are no pre-configured access rules.
ISA 3000: A rule trusting all traffic from the inside_zone to the
outside_zone, and a rule trusting all traffic from the outside_zone
to the inside_zone. Traffic is not blocked. The device also has
rules trusting all traffic between the interfaces in the inside_zone
and in the outside_zone. This allows without inspection all traffic
between users on the inside, and between users on the outside.
Access control policy.
Implied.An interface dynamic PAT rule translates the source address for
any IPv4 traffic destined to the outside interface to a unique port
on the outside interface's IP address.
There are additional hidden PAT rules to enable HTTPS access
through the inside interfaces, and routing through the data
interfaces for the management address. These do not appear in
the NAT table, but you will see them if you use the show nat
command in the CLI.
Firepower 4100/9300: NAT is not pre-configured.
ISA 3000: NAT is not pre-configured.
NAT
Configuration Basics
The following topics explain the basic methods for configuring the device.
Configuring the Device
When you initially log into FDM, you are guided through a setup wizard to help you configure basic settings.
Once you complete the wizard, use the following method to configure other features and to manage the device
configuration.
If you have trouble distinguishing items visually, select a different color scheme in the user profile. Select
Profile from the user icon drop-down menu in the upper right of the page.
Procedure
Step 1 Click Device to get to the Device Summary.
Getting Started
32
Getting Started
Configuration Basics

Cisco Firepower 1140 Specifications

General

Processor cores	16
Processor family	Intel
Built-in processor	Yes
Firewall throughput	2200 Mbit/s
IPSec VPN throughput	1.2 Gbit/s
Maximum firewall connections	400000
Maximum firewall connections per second	100000
Wi-Fi	No
Supported network protocols	SMTP
Console port	RJ-45
Connectivity technology	Wired
SFP module slots quantity	4
Ethernet LAN (RJ-45) ports	8
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
SSD capacity	200 GB
Storage media type	SSD
Form factor	1U
Input current	2 A
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	100 W
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Country of origin	Mexico
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85176990
Package depth	1409.7 mm
Package width	990.6 mm
Package height	457.2 mm
Package weight	5782.31 g

Weight and Dimensions

Depth	436.9 mm
Width	268.7 mm
Height	43.7 mm