Cisco Intelligent Wireless Access Gateway User Manual

Prerequisites for Configuring Ethernet Over GRE
Before you configure the Ethernet over GRE feature on the Cisco ASR 1000 Series Aggregation Services
Routers, ensure that the following prerequisites are met:
•
A physical interface or dot1Q interface should be configured.
•
The ISG policy should not be applied to the physical interface.
Information About Configuring Ethernet Over GRE
The Cisco ASR 1000 Series Aggregation Services Routers serve as a service provider broadband network
gateway that:
•
Terminates IPv4 or IPv6 GRE tunnels.
•
Manages the subscriber session for end-host clients.
The EoGRE feature works with legacy residential gateways and CPE devices to terminate the Ethernet L2
traffic in the Cisco ASR 1000 Series Aggregation Services Routers. When configured as an intelligent Wireless
Access Gateway (iWAG) with EoGRE access tunneling support, the Cisco ASR 1000 Series Aggregation
Services Routers can extend mobility and the ISG services in support of these legacy devices.
Intelligent Wireless Access Gateway Configuration Guide
OL-30226-03 39
Service Provider WiFi: Support for Integrated Ethernet Over GRE
Prerequisites for Configuring Ethernet Over GRE

Cisco Intelligent Wireless Access Gateway Specifications

General

Brand	Cisco
Model	Intelligent Wireless Access Gateway
Category	Gateway
Language	English