EasyManuals Logo
Home>Cisco>Gateway>Intelligent Wireless Access Gateway

Cisco Intelligent Wireless Access Gateway User Manual

Cisco Intelligent Wireless Access Gateway
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
stack
15 service-policy type service name ACC_V4 #applying services during dual
stack
16 service-policy type service name ACC_V6 #applying services during dual
stack
20 service-policy type service name TO_V4 #applying services during dual
stack
21 service-policy type service name TO_V6 #applying services during dual
stack
25 service-policy type service name SESSION_TIMEOUT_SERVICE #applying services during
dual stack
30 authorize aaa list default identifier mac-address #performs MAC TAL authorization
Example: Configuring an Access Interface for Dual-Stack PMIPv6
interface GigabitEthernet0/0/2
description manthiya connected to MN1
ip address 11.1.1.2 255.255.255.0
negotiation auto
ipv6 address FE80::200:5EFF:FE00:5213 link-local
service-policy type control PMIP_DUAL_STACK #subscriber services are applied based on
the control policy definition
ip subscriber l2-connected #invokes iWAG functionality
initiator unclassified mac-address #unclassified MAC address with IPv4 and IPv6
packets,
are treated as FSOL to create a session
initiator dhcp #DHCP control packets are used as FSOL
to create DHCPv4 only session
end
Example: Configuring the Local Mobility Anchor for Cisco ASR 5000 Routers
context pgw
ip pool PMIP_POOL 70.70.0.1 255.255.0.0 public 0 subscriber-gw-address 70.70.70.1
ip pool v4_staticpool 9.9.9.1 255.255.0.0 static
ipv6 pool v6_pool prefix eeee::1/48 public 0 policy allow-static-allocation
router rip
network ip 70.70.0.0/16
network name lma2
redistribute connected
version 2
exit
interface lma2
ipv6 address aaaa:bbbb::2/64
ip address 60.1.1.2 255.255.255.0 secondary
exit
subscriber default
exit
apn cisco.com
pdp-type ipv4 ipv6 #enables dual-stack address assignment under ASR 5K LMA
selection-mode sent-by-ms
accounting-mode none
ip context-name pgw
exit
aaa group default
exit
gtpp group default
exit
lma-service lma2
no aaa accounting
reg-lifetime 40000
timestamp-replay-protection tolerance 0
mobility-option-type-value standard
revocation enable
Intelligent Wireless Access Gateway Configuration Guide
OL-30226-03 73
Dual Stack Support for PMIPv6 and GTP
Example: Configuring an Access Interface for Dual-Stack PMIPv6

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Intelligent Wireless Access Gateway and is the answer not in the manual?

Cisco Intelligent Wireless Access Gateway Specifications

General IconGeneral
BrandCisco
ModelIntelligent Wireless Access Gateway
CategoryGateway
LanguageEnglish

Related product manuals