Cisco IP DECT 6800Series User Manual

CHAPTER 7
Alarm Clock, Emergency Alarm List, and Function
Keys
• Alarm Clock, on page 63
• Emergency Alarm List, on page 65
• Function Keys, on page 66
Alarm Clock
You can use your handset as an alarm clock. When the alarm rings, you can dismiss the alarm or set the
handset to ring in a few minutes. You can set a one-time alarm or a recurrent alarm.
The Alarms screen displays:
• The one-time Alarm entry displays the time of the alarm (if set).
• From Firmware Release 4.7, the Recurrent alarm entry displays the time of the alarm and the days
selected for the alarm (if set).
• In Firmware Release V450 and V460, the Recurrent alarm entry displays the time of the next alarm (if
set).
• The Snooze time entry displays the length of time before the alarm rings again.
Set an Alarm
You can set your handset to remind you at a specific time with an alarm timer. When the timer expires and
the handset rings, the alarm field returns to Off.
You can set only one single-use alarm at a time.
Procedure
Step 1 Press Menu .
Step 2 6825 Handset: Select Alarms > Alarm.•
Cisco IP DECT 6800 Series User Guide
63

Cisco IP DECT 6800Series Specifications

General

Brand	Cisco
Model	IP DECT 6800Series
Category	IP Phone
Language	English