hw-module location location mxponder-slice slice-number client-port-ains-soak hours hours minutes
minutes
commit
The following is a sample in which slice 0 client ports are configured with AINS with soak time period
specified to be 40 minutes.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#hw-module location 0/3 mxponder-slice 0 client-port-ains-soak
hours 0 minutes 40
RP/0/RP0/CPU0:ios(config)#commit
Disabling AINS
To disable AINS on all muxponder client ports, set the hours and minutes to 0. Use the following commands:
configure
hw-module location location mxponder client-port-ains-soak hours hours minutes minutes
commit
The following is a sample in which AINS is disabled on all client ports.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#hw-module location 0/3 mxponder client-port-ains-soak hours 0
minutes 0
RP/0/RP0/CPU0:ios(config)#commit
To disable AINS on a muxponder slice, set the hours and minutes to 0. Use the following command:
configure
hw-module location location mxponder-slice slice-number client-port-ains-soak hours hours minutes
minutes
commit
The following is a sample in which AINS is disabled on all client ports of slice 0.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#hw-module location 0/3 mxponder-slice 0 client-port-ains-soak
hours 0 minutes 0
RP/0/RP0/CPU0:ios(config)#commit
Displaying the AINS Configuration
The AINS Soak field in the output indicates the current state of AINS. The current state can be None, Pending,
or Running. The Total Duration field indicates the total soak time period that is configured. The Remaining
Duration field indicates the soak time that remains, after which, the AINS state moves to None.
This example displays the ethernet controller statistics with AINS Soak in running state.
RP/0/RP0/CPU0:ios#show controller HundredGigECtrlr 0/1/0/2
Thu Feb 21 19:52:55.001 UTC
Operational data for interface HundredGigECtrlr0/1/0/2:
State:
Configuring Controllers
3
Configuring Controllers
Disabling AINS
To Next Page
Loading...
Need help?
General
