Cisco Spam User Manual

- Cisco Spam & Virus Blocker -
- Quick Start Guide -
You will need the following items to get started:
A desktop or laptop computer •
Two ethernet cables (one ethernet cable is shipped with the •
Blocker, and you must provide the second).
Web browser •
Network information for “Go Live” conguration (Step 10): •
MX records. Determine where your current MX records point. •
NAT settings. Determine where your Port 25 trafc is sent. •
Firewall settings. Determine the rewall ports you may need •
to open.
Before you begin, write down the following information about
your network and administrator settings. You will need to enter
this information when running the System Setup Wizard, starting
on Step 8.
Getting Started
1
admin (non-configurable)
NETWORK SETTINGS
Blocker Hostname __________________________________________________
Blocker IP Address__________________________________________________
Subnet Mask _______________________________________________________
Gateway IP Address ________________________________________________
LOCAL DNS SERVER INFORMATION
Primary DNS Server IP Address ______________________________________
Secondary DNS Server IP Address ___________________________________
MAIL CONFIGURATION SETTINGS
Accept email for the following domains _______________________________
Mail Server _________________________________________________________
ADMINISTRATOR SETTINGS
Administrator Email _________________________________________________
Administrator Username ____________________________________________
Administrator Password _____________________________________________
box
in the
Cisco Spam & Virus Blocker • 1 Ethernet Cable
Quickstart Guide • FAQ
Rail Kit • T-Shirt • Documentation CD

Cisco Spam Specifications

General

Brand	Cisco
Model	Spam
Category	Firewall
Language	English