Cisco UCS B200 M5 User Manual

b) Check the check box in the Mapped column for the media that you just added, and then wait for mapping
to complete.
Step 5
Power cycle the server.
Step 6
Press F6 when you see the F6 prompt during bootup. The Boot Menu window opens.
Step 7
On the Boot Manager window, choose the physical disk or virtual DVD and press Enter. The Windows
installation begins when the image is booted.
Step 8
Press Enter when you see the prompt, “Press any key to boot from CD.”
Step 9
Observe the Windows installation process and respond to prompts in the wizard as required for your preferences
and company standards.
Step 10
When Windows prompts you with “Where do you want to install Windows,” install the drivers for embedded
MegaRAID:
a) Click Load Driver. You are prompted by a Load Driver dialog box to select the driver to be installed.
b) Connect the USB thumb drive that you prepared in Step 3 to the target server.
c) On the Windows Load Driver dialog, click Browse.
d) Use the dialog box to browse to the location of the drivers folder on the USB thumb drive, and then click
OK.
Windows loads the drivers from the folder and when finished, the driver is listed under the prompt, “Select
the driver to be installed.”
e) Click Next to install the drivers.
Updating Microsoft Windows Server Drivers
Procedure
Step 1
Click Start, point to Settings, and then click Control Panel.
Step 2
Double-click System, click the Hardware tab, and then click Device Manager. Device Manager starts.
Step 3
In Device Manager, double-click SCSI and RAID Controllers, right-click the device for which you are
installing the driver, and then click Properties.
Step 4
On the Driver tab, click Update Driver to open the Update Device Driver wizard, and then follow the wizard
instructions to update the driver.
Linux Drivers
Downloading the Driver Image File
See Downloading the MegaSR Drivers, on page 18 for instructions on downloading the drivers. The Linux
driver is included in the form of dud-[driver version].img, which is the boot image for the embedded
MegaRAID stack.
Cisco UCS B200 M5 Blade Server Installation and Service Note
20
Servicing a Blade Server
Installing LSI MegaSR Drivers For Windows and Linux

Cisco UCS B200 M5 Specifications

General

Brand	Cisco
Model	UCS B200 M5
Category	Server
Language	English