Cisco UCS C240 User Manual

2-7
Cisco UCS C240 Server Installation and Service Guide
OL-25761-01
Chapter 2 Installing the Server
Installing the Server In a Rack
Figure 2-3 Inserting the Server Into the Slide Rails
Step 3 Optional–If you want to install the cable management arm, continue with Installing the Cable
Management Arm (Optional), page 2-8.
1 Inner rail on server 3 Slide rail assembly on rack post
2 Slide rail locking clip 4 Right-front rack post
1
2
3
4
330534

Cisco UCS C240 Specifications

General

Management	Cisco Integrated Management Controller (CIMC)
Form Factor	2U Rack
Memory	Up to 3TB DDR4
Storage	Up to 24 x 2.5-inch or 12 x 3.5-inch SAS/SATA HDDs or SSDs
Power Supply	Redundant hot-swappable power supplies (various wattage options)

Summary

Preface

Related Documentation

Information on the documentation set for Cisco Unified Computing System (UCS) C-Series rack-mount servers.

Organization

Describes how the guide is structured into chapters and appendices for clarity.

CHAPTER 1 Overview

External Features Overview

Overview of the external features of the Cisco UCS C240 server, including drive bay configurations.

Summary of Server Features

Lists a summary of the key features of the Cisco UCS C240 server, including chassis, processors, memory, and I/O.

CHAPTER 2 Installing the Server

Unpacking and Inspecting the Server

Step-by-step instructions for unpacking and inspecting the server shipment for damage or missing items.

Preparing for Server Installation

Guidelines and requirements for preparing the server installation environment, including rack and electrical codes.

Installing the Server In a Rack

Detailed procedure for installing the server into a rack using slide rails, including cable management arm.

Initial Server Setup

Steps for connecting and powering on the server for initial setup in standalone mode.

Updating the BIOS and CIMC Firmware

Procedures for updating the server's BIOS and CIMC firmware to ensure compatibility and functionality.

CHAPTER 3 Maintaining the Server

Server Monitoring and Management Tools

Overview of tools like CIMC and Server Configuration Utility for monitoring and managing the server.

Status LEDs and Buttons

Explains the meaning of front and rear panel LEDs and buttons for server status indication.

Preparing for Server Component Installation

Steps to prepare the server for installing or replacing components, including required equipment.

Installing or Replacing Server Components

General instructions and overview for installing or replacing various server hardware components.

APPENDIX A Server Specifications

Physical Specifications

Lists the physical dimensions and weight of the Cisco UCS C240 server.

Power Specifications

Details the power supply options, including AC and DC specifications for the server.

APPENDIX B Power Cord Specifications

Supported Power Cords and Plugs

Lists and illustrates the supported power cords and plugs for the Cisco UCS C240 server.

APPENDIX C RAID Controller Considerations

Supported RAID Controllers and Required Cables

Details supported RAID controllers, their requirements, and necessary cabling for the server.

Embedded MegaRAID Controller

Details about the embedded MegaRAID controller, its features, and limitations.

RAID Controller Cabling

Instructions and diagrams for routing cables for RAID controllers and backplanes.

Restoring RAID Configuration After Replacing a RAID Controller

Procedure to restore RAID configuration after replacing a RAID controller.

APPENDIX D Installation for Cisco UCS Integration

Cisco UCS C-Series Server Integration with UCS Manager Guides

Points to integration guides for connecting Cisco UCS C-Series servers with UCS Manager.