Cisco WS-C2960L-24TS-LL User Manual

System LED
System StatusColor
System is not powered on.Off
System is operating normally.Green
System is receiving power but is not operating
properly.
Amber
POST is in progress.Blinking Green
Modes for Port LEDs
The port LEDs, as a group or individually, display information about the switch and about the individual
ports.
DescriptionPort ModeLED
The port status. This is the default mode.Port statusSTAT
The port operating speed: 10, 100, or 1000
Mb/s.
Port speedSPEED
The PoE status.PoE port powerPoE
PoE LED
Even if the PoE mode is not selected, the LED shows PoE problems when they are detected. The PoE LED
is only on the switches that support PoE.
DescriptionColor
PoE mode is not selected.Off
PoE mode is selected. Ports are functioning correctly.Green
•
PoE mode is not selected
•
At least one of the 10/100 or 10/100/100 PoE ports has been denied
power
•
At least one of the ports has a PoE fault
Blinking amber
Cisco Catalyst 2960-L Series 24-Port and 48-Port Switch Hardware Installation Guide
7
Product Overview
LEDs

Cisco WS-C2960L-24TS-LL Specifications

General

Brand	Cisco
Model	WS-C2960L-24TS-LL
Category	Switch
Language	English