Cisco XR 12000 Series Installation Guide

82
Cisco XR 12000 Series Router Ethernet Line Card Installation
OL-7861-01
Regulatory, Compliance, and Safety Information
VCCI Class A Notice for Japan
Class A Notice for Korea
Laser Safety
Single-mode Ethernet line cards (all of the line cards except 8-Port Fast Ethernet) are equipped with a
Class 1 laser. Multimode Ethernet line cards (Gigabit Ethernet and 4-Port Gigabit Ethernet ISE) are
equipped with a Class 1 LED. These devices emit invisible radiation. Do not stare into operational line
card ports. The following laser warnings apply to the Ethernet line cards:
• Class 1 Laser Product Warning (Single-mode), page 83
• Class 1 LED Product Warning (Multimode), page 83
• General Laser Warning, page 83
Warning
This is a Class A product based on the standard of the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio
disturbance may arise. When such trouble occurs, the user may be required to take corrective
actions.
Statement 191
Warning
This is a Class A Device and is registered for EMC requirements for industrial use. The seller or
buyer should be aware of this. If this type was sold or purchased by mistake, it should be replaced
with a residential-use type.
Statement 294

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English