XI
184
PRACTICAL INFORMATION
Front foglamps
) Remove the fi xing screw of
cover A using a torx tool, tip the
cover over and remove.
) Remove the fi xing screw of
lamp B using a torx tool and pull
the headlamp unit to remove it
from the bumper.
) Disconnect the connector D .
) Remove the bulb by performing
a quarter of a turn.
) Replace the bulb.
) Refi t the connector D .
) Refi t the headlamp unit in the
bumper.
) Refi t the lamp screws.
) Position the cover using its
guides and refi t the screws.
Bulbs: H8
Direction indicators
) Remove the fi xing screw of
cover A using a torx tool, tip the
cover over and remove.
) Remove the fi xing screw of
lamp B using a torx tool and pull
the headlamp unit to remove it
from the bumper.
) Detach the bulb C by pressing
on bars 1 and 2 .
) Disconnect the connector (pull
whilst pressing on the grey
tongue using a fl at screwdriver).
) Replace the bulb.
) Refi t the connector (push the
grey tongue in well).
) Refi t the headlamp unit in the
bumper.
) Refi t the lamp screws.
) Position the cover using its
guides and refi t the screws.
Bulbs: HP24W