XI
187
PRACTICAL INFORMATION
Boot-mounted lamps
) Open the boot.
) Using a fl at screwdriver, remove
the plastic cover F .
) Disconnect the connector G .
) Unscrew the fi xing nut H .
) Disengage the lamp from its
housing.
Rear lamps (Tourer)
Identify the failed bulb.
1. Brake lamps and sidelamps:
P 21 W / 5 W
2. Sidelamps: R 5 W
3. Reversing lamps : H 21 W
4. Foglamps: H 21 W
5. Direction indicators:
PY 21 W
) Unclip the bulb holder J .
) Replace the bulb.
) Refi t the bulb holder J ensur-
ing that it is correctly clipped in
place.
) Position the lamp in its housing.
) Tighten the fi xing nut H .
) Refi t the connector G .
) Position and clip in place the
plastic cover F .
You can use the wheelbrace to screw
or unscrew the fi xing nut H .
To Next Page
Loading...
Need help?
General
