XI
188
PRACTICAL INFORMATION
Wing-mounted lamps
Remove the lateral boot trim A .
To do so:
) Pull it towards towards the inside
of the boot.
) Pull it upwards.
) Disconnect the connector B .
) Unscrew the fi xing nut C .
)
Remove the lamp from its housing.
) Detach the bulb holder D .
) Replace the faulty bulb.
) Refi t the bulb holder D .
) Place the lamp in its housing.
) Screw in the fi xing nut C .
) Refi t the connector B .
) Refi t the trim A .
You can use the wheelbrace to screw
or unscrew the fi xing nut C .