XTERIOR LIGHTING
CONTROLS
Control stalk for the selection and
control of the various front and rear
lamps providing the vehicle's lighting.
Main lighting
The various front and rear lamps of
the vehicle are designed to adapt
the driver's visibility progressively in
relation to the climatic conditions:
- sidelamps, to be seen,
- dipped beam headlamps to see
without dazzling other drivers,
- main beam headlamps to see
clearly when the road is clear.
Additional lighting
Other lamps are fi tted to fulfi l the re-
quirements of particular driving con-
ditions:
- a rear foglamp to be seen from a
distance,
- front foglamps for even better
forward vision,
- directional headlamps for im-
proved visibility when cornering,
- daytime running lamps to be
seen during the day.
Settings
Various automatic lighting control
modes are also available depending
on options:
- daytime running lamps,
-
automatic illumination of headlamps,
- directional lighting,
- guide-me-home lighting.
Manual controls
Lamps off.
Automatic illumination of
headlamps.
Sidelamps.
Dipped headlamps or
main beam headlamps.
B. Stalk for switching headlamps:
pull the stalk towards you to
switch the lighting between
dipped and main beam head-
lamps.
In the lamps off and sidelamps
modes, the driver can switch on the
main beam headlamps temporarily
("headlamp fl ash") by maintaining a
pull on the stalk.
Displays
Illumination of the corresponding indicator
lamp in the instrument panel confi rms that
the lighting selected is on.
The lighting is controlled directly by
the driver by means of the ring A
and the stalk B .
A. Main lighting mode selection ring:
turn it to position the symbol re-
quired facing the mark.
In some weather conditions (e.g.
low temperature or humidity), the
presence of misting on the internal
surface of the glass of the head-
lamps and rear lamps is normal; it
disappears after the lamps have
been on for a few minutes.
To Next Page
Loading...
Need help?
General
