Clarion CMS3 User Manual

English
Owner’s Manual
6
5. OPERATIONS
Basic Operation
CAUTION
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level it may cause hearing
damage. Be careful about adjusting the
volume.
While boating, please be aware of the
volume levels in residential, family areas
and local volume level ordinances.
Turning on and off the power
Selecting a mode
Adjusting the volume
Engine ON
position
Note: Be sure to read this chapter referring
chapter “ 4. CONTROLS ”
to the
Note:
Start the engine before using this unit.
Be careful about using this unit for a long time
without running the engine. If you drain the
vessel battery too far, you may not be able to
start the engine and this can reduce the service
life of the battery.
1. Start the engine. The power button / knob
illumination on the unit will light up.
2. Press the [ /SOURCE] button to turn the
power on and press and hold it (1 sec.) to
turn the power off.
1. Press the button to change
to the next available source.
[ /SOURCE]
*
External equipment not connected to this unit
is not displayed.
1. Press [ ] button to increase the volume.
Mute
Press the [ ] button to turn the Mute On
and Off.
2. Press [ ] button to decrease the volume.
CMS3

Clarion CMS3 Specifications

General

Brand	Clarion
Model	CMS3
Category	Marine Equipment
Language	English