Clarion M303 User Manual

SiriusXM
Satallite Radio Operations
Everything worth listening to
is
on
SiriusXM,
getting
over
130
channels,
including
the
most commercial-free music, plus the best
sports, news,
talk
and
entertainment.
!o
start
listening
to the SiriusXM™ Satellite
Radio, A
SiriusXM
Vehicle Tuner (purchased
separately) and Subscription are required.
Displaying the Radio
ID
Before you listen to
satellite
radio, you must
subscribe to the service using the SiriusXM
Radio
ID
number.
1 .
Press
[SRC
I(!)
]
button
to
activate
SiriusXM-mode.
2.
Press[...,..]
or[~]
to select channel
"0".
The unit displays Radio
I
D.
Notes:
1.
The Radio
ID
is
located
on
the bottom of
the
SiriusXM
Connect Vehicle Tuner.
2.
Please
note that the
SiriusXM
Radio
ID
does not include the letters
I,
0,
S
or
F.
3.
Activate the
SiriusXM
Connect Vehicle
Tuner using one of the two methods below:
Online: Go to ''www.siriusxm.com/
activatenow".
• Phone: Call 1-866-635-2349.
•
To activate
SiriusXM
Canada service go to
www.xmradio.ca and click
on
"ACTIVATE
RADIO"
in
the top right corner, or
call
1-877-438-9677
Storing Channel
Presets
1.
Press
[BAND
IIC]
to select the desired
band you want to store the preset in.
There are 3
Satellite
Radio
Preset
bands.
Each press of
[BAND
IIC]
changes the
band:
SXM1
->
SXM2
->
SXM3
->
SXM1
2.
Tune
to the
desired
channel and then
press and hold one of the preset buttons
(1
through
6),
to store the
channel.
3.
Repeat the procedure
to
store
up
to 5 other
channels
on
to the same band.
Note:
•
A total of
18
channels can
be
stored
in
the
preset memory, 6 channels for each band
(SXM1
,SXM2
and
SXM3).
Tuning
Channels
using Presets
1.
Press
[BAND
lte]
to select the desired
band of
Presets
you
wish to access.
2.
Press
the preset button
(1
through
6)
that
has your desired
Satellite
Radio channel
stored
in
memory.
Category Browsing
1 .
Press
and hold
[BAND
ltc]
to activate the
Category Browsing mode.
2.
Rotate
the
[VOLUME]
knob to
select
desired category.
3.
Press
[..,..]
or
[~]
to
select
desired
channel within the selected Category.
You
can see channel name, channel number,
artist, title or content by pressing
[DISP].
4.
Press
[VOLUME]
to
tune
to
selected
channel.
Note:
If
no operation
is
perfprmed for
10
seconds,
the Category Browsing mode
is
canceled.
Preset scan
Preset
scan receives the stations stored
in
preset memory
in
order. This.
functio~
is
useful when searching for a
des1red
stat1on
in
memory.
1.
Press
and hold the
[PSIAS]
button.
2.
When a desired station
is
tuned
in,
press
the
[PSIAS]
button again to
continue
receiving that station.
Channel scan (in current category)
Channel
scan
receives
the
channel
(in
current category)
in
order. This function
is
useful when searching for a desired channel
in
current category.
1.
Press
the
[PS/AS]
button.
2.
When a desired channel
is
tuned
in,
press
the
[PSIAS]
button again to
continue
receiving that
channel.
Note:
•
Be
careful
not to press and hold the
[PSIAS]
button for 1 second or
_longe_r,
otherwise the preset scan
funct1on
w111
begin and the unit starts scaning presets.
Artist
&
Song Alerts
While listening to SiriusXM Satellite
Radio,
you can
be
alerted when your favorite songs
or artists are playing
on
other channels. The
radio
will
display
an
Alert message when a
matching artist or song
is
found
on
another
channel.
Then
you
can
choose if
you
want to
tune to that favorite or
you
can ignore
it
and
stay
on
your current
channel. Information
SiriusXM
Satallite Radio
Operations
on setting
up
the Artist and
Song alerts is
described below.
1.
While
listening to favorite song, press
[VOLUME]
knob to add the artist or press
and hold
[VOLUME]
knob to add the song
to the
"Artist
& Song Alerts"
list.
2.
Rotate
[VOLUME]
knob and select
"YES",
and press
[VOLUME]
knob to store item.
3.
Rotate
[VOLUME]
knob and select
"NO",
and press
[VOLUME]
knob to quit.
4.
You can manage the stored Alert memory
setting.
Press
and hold
[MENU
I
'21
]
and
rotate
[VOLUME]
knob to select
"ALERT
LIST".
Press
[VOLUME]
knob to display
stored
alert
items.
Rotate
and
press
[VOLUME]
knob to select desired alert
item. Then select
"ON"
to activate alert,
"OFF"
to deactivate or
"DELETE"
to delete
this item. (press
and
hold
[VOLUME]
knob)
You can also activate and deactivate Alert
function
in
System Setup
menu.
Notes: .
•
You can store up to 50
items for
Art1st
&
Song
Alerts.
"XU(sed)/YE(mpty)"
is
displayed when the new item
is
stored. X
is
the total number of song titles or artist
names stored
in
memory,
andY
is
the total
number memory locations
still
available for
storage. .
.
• If
either
the artists
or
song
t1tle
1s
not
available,
"NO SONG"
or
"NO ARTIST"
will
be displayed. .
• If
you try to store item when memory
1s
full,
"MEMORY
FULL"
is
displayed.
If
you want to store another, please delete
existing alert item.
Receiving and Tuning to an
Alert
Whenever a stored artist or song
is
playing
on another channel alert message,
"ART
ALERT"
or
"SNG ALERT"
appears
on
the
unit display.To tune to artist or song identified
by the alert, press
[VOLUME]
knob.
Notes:
If
no
operation
is
performed for 5 seconds,
the unit returns to normal mode.
•
Artist name and
Song
title which you have
stored and which are currently playing
will
be displayed
in
category called
"MY
MUSIC"
in
search mode.
My Music search
You
can
access
the
channel
which
is
broadcasting the contents
in
the activated Alert
list.
1.
Press
and hold
[MENU
I
'21
],
and rotate
[VOLUME]
knob
to
select
"MY
MUSIC
LIST'.
2.
Press
[VOLUME]
knob to display matched
songs which are currently broadcasted
3.
Rotate
[VOLUME]
knob to select desired
song, and press
[VOLUME]
to tune to that
channel.
Note: .
• If
there
is
no
matched songs broadcasted,
1t
displays
"MEM
EMPTY".
SiriusXM Replay™ function
The
Replay
feature
allows
y~u
to
pau~e,
rewind, and replay up to
60
mmutes of
live
SiriusXM Satellite
Radio.
1.
While listening to a SiriusXM channel, press
[MENU
I
'21
]
to enter Replay mode.
~he
display
will show"PAUSE"
when entenng
this mode.
2.
Press
[~
u]
to
resume playback of the stored
audio from the point at which it was paused.
During playback,the
SiriusXM
!une~
will
continue to store the channel
aud1o
unt1l
you
exit the Replay mode.
During REPLAY
playback:
•
Fast rewind: Press
and
hold[~.
•
Fast forward:
Press
and hold
r.....J.
•
Returning to the beginning of the current
song:
Press
[..,.].(If
you press
[~]
in
the first
2
seconds
of a
song,you
return to
the
beginning of the previous song.)
Advancing
to the beginning of the next
song:
press[..,...].
3.
Press
[MENU
I
'21]]
to finish Replay mode.
Notes: .
• If
you continue to press the
[..,...]
button
unt1l
the end,the Replay mode
is
canceled,
a~d
the unit
will
change to live SiriusXM
rad1o
mode.
•
If
you change channels while in Replay
mode, the unit
will exit Replay mode to
live
Satellite
mode and clear the Replay
memory.
•
Replay
mode
is
being
kept
when
you
change the source other than
SiriusXM
mode.
M303
11

Clarion M303 Specifications

General

Brand	Clarion
Model	M303
Category	Marine Equipment
Language	English